sir_snipe_alot

Ill have this done soon, with photos and instructions. Ill post in the sub heading when finished. It should be done in a few days.

__________________

Fets

There is actually a better place for this. Write an article and post it in the Articles Depot. You can find this on the main page.

__________________

sir_snipe_alot

alright, thanks

__________________

ZEUS

It's actually pretty easy with a dremel.. I did my SAW and my X7 in 5 minutes each.. Smooth as a whistle now.

sir_snipe_alot

lol I hand polish

__________________

tacsnipa

I know that this is an old post but hopfully this help out:
http://forum.specialopspaintball.com...howtopic=79663

Reccanize

I have a Dremel also what polisher did you use?

__________________

tacsnipa

Dremel buffing pads and aluminum polish.

R O M E

Im going to try that brillo method that tacsnipa posted since mine arnt polished , i have a dremel but im not taking a chance of @#$^@# my internals up

tacsnipa

Thats the trouble with deremel's one wrong move and it screws everything up. Glad to see you found this usefull.

Reccanize

Elaborate please.

__________________

tacsnipa

If you apply too much pressure or polish the oppostite direction of the bolt you are screwed. Also some people have used the wrong head on the dremel make sure you use the polishing head.

Fets

Just be careful not to polish too much. You want to remove the over spray and smooth out the chamber. That is all.

__________________

Reccanize

I did it! Thanks for all the advise. I used the Brillo method. On my X7 I might try the Dremel:boobs:

__________________

FeraL

Snipe, you can use these photos if you want. Didnt want to trample all over your thread, but I took some pics of the before and after of polishing.

before with lots of over spray

after with a nice shine


together, see the contrast?