FeraL

In the past few months, I?ve noticed an issue with remote lines. Removing the line while still under pressure of CO2 even with the tank turned off. Just because you have the tank off, does not mean that line does not still have gas in it. What happens when you remove it? You lose the little O ring inside of it. That O-ring is one of the most important pieces in the setup. Why? It is the seal from the female end of the remote line to the male end of your marker nipple. If you lose the O-ring, there goes your remote line setup.

So keep in mind when you?re checking your gun and you want to remove the line. Removing it while depressurized will save you a ton of trouble.


You might want to invest in some O-rings as well

R O M E

If you have a slide check remote, Turn off your c02 tank , Turn slide you remote off and then just unscrew the tank, you loose all the access c02 inside the line when you do this

Fets

Remove the slidecheck from the marker, turn off the co2 tank, open the slidecheck and de-pressurize your remote, remove the HPA/CO2 tank. This will save all your o-rings.

__________________

Magik

My slide check was more trouble than it was worth. I took mine off and just use a standard remote.

Worked like a charm last game.

sir_snipe_alot

Thats what I did, I didn't really even find a use for having the slide check, so if anyone wants a spare, just tell me.

__________________

Fets

Yeah, I could use a spare. I love the slidecheck, I can't stand to play without it!

__________________

Piranha

You can have mine if you don't already have a spare. I never use it.